Honda Advances Hydrogen Strategy with Production Launch of Fuel Cell Electric Vehicle in Ohio

June 5, 2024

34 7 minutes read

Untitled design6 — 1717605056 io logo 800x450.jpg

Production of all-new 2025 CR-V e:FCEV fuel cell electric vehicle begins at Performance Manufacturing Center in

Marysville, OH

– the only FCEV made in America
Honda experience with fuel cell vehicles spans over 20 years starting with the 2003 Honda FCX, the world’s first zero-emission fuel cell electric vehicle (FCEV) to receive government certification

MARYSVILLE, Ohio

,

June 5, 2024

/PRNewswire/ — Honda today celebrated the start of production of the all-new 2025 Honda CR-V e:FCEV fuel cell electric vehicle (FCEV) at the Performance Manufacturing Center (PMC) in

Ohio

. The

all-new CR-V e:FCEV

is the only FCEV made in America, as well as the first production
¹
hydrogen FCEV in

the United States

to combine an all-new U.S.-made fuel cell system with plug-in EV charging capability. A fun-to-drive compact CUV, the CR-V e:FCEV received a 270-mile EPA driving range rating, combining the fuel cell system with plug-in charging to provide up to 29 miles
²
of EV driving around town with the flexibility of fast hydrogen refueling for longer trips.

“The Performance Manufacturing Center was conceived as a small volume manufacturing facility with a focus on craftsmanship, and I’m proud of how our production technicians leveraged their experience building the Acura NSX to take on the challenge of making this all-new Honda CR-V e:FCEV,” said

Patrick McIntyre

, lead of PMC. “Producing a zero-emission fuel cell electric vehicle is one more step toward Honda’s global goal of achieving carbon neutrality for our products and operations.”

In addition to producing the Honda CR-V e:FCEV in America, the next gen fuel cell system that powers it is also

made in the U.S. at Fuel Cell System Manufacturing LLC,

in Brownstown,

Michigan

– the joint venture production facility established by Honda and General Motors (GM). The new fuel cell system was co-developed by Honda and GM, achieving higher efficiency and increased refinement, with durability performance doubled and cost reduced by two-thirds compared to the previous fuel cell system in the Honda Clarity Fuel Cell.

PMC Innovations for CR-V e:FCEV Production

Production technicians at PMC navigated several challenges related to new production equipment and processes to effectively transition from building the Acura NSX supercar to the Honda CR-V e:FCEV. Following is a look at several of these key initiatives.

New components:

PMC technicians are taking on multiple new assembly processes specific to producing a vehicle powered by both a fuel cell system and a plug-in EV battery, requiring multiple connections for the vehicle’s two power sources and the Power Supply Connector that can provide electrical power for various external devices. These include:
- Sub-assembly of two hydrogen tanks, attaching high pressure piping and other parts and then installing the tanks in the vehicle
- Compressing hydrogen to 10,000 PSI via a new onsite station used to fill the CR-V e:FCEV hydrogen fuel tanks
- Installation of the fuel-cell system along with connecting high pressure piping and wiring
- Sub-assembly and installation of the under-floor battery
New Weld System:

Transitioning to the CR-V e:FCEV required a complete transformation of the Weld Department, from a highly-automated welding system created for an aluminum spaceframe to a multi-material unibody construction.
- The previous robotic weld system was removed and replaced with new steel welding robots which were installed with characteristics of a traditional weld system but are unique from mass production plants with a flexible fixture system that rolls around on a track.
- PMC technicians also now perform some manual MIG welding to apply welds that are difficult for robots to reach to attach closure parts for the doors, hood and tailgate.
Paint System Modifications:

The larger and heavier all-steel body of the CR-V e:FCEV requires a different corrosion protection application process than the smaller, all-aluminium Acura NSX.
- The CR-V e:FCEV marks the first application in Honda North America of zirconium to a mixed metal, uni-body, and utilizes the same high-appearance paint coating as the NSX. The E-coat dip tank was designed for the smaller surface area of the NSX spaceframe, not a full frame vehicle like CR-V with more surface area inside. So, engineers had to modify the dip tank to enable the CUV body shape to enter at a 38-degree angle, steeper than the 15-degree angle for NSX. More precise control of the E-coat pumps also was required for CR-V, to create higher circulation of the E-coat to cover the surface area inside the frame.
- Following e-coating, but prior to application of the final paint finish, sealer is applied to prevent water leaks. The CR-V body is mounted on a rotisserie, but unlike the previous equipment arm used to turn the lighter NSX spaceframe, a more robust arm that can maintain stability of the heavier CR-V steel frame is used to turn the frame on its side. This enables associates to manually apply sealer similar to the application for the NSX.

Production of the FCEV at the PMC also is laying the groundwork for production of battery-electric vehicles at the Honda EV Hub in

Ohio

from the standpoint of software for the Integrated Power Unit (IPU).

Video of these manufacturing innovations can be found

here

.

CR-V e:FCEV Product Highlights

The Honda CR-V is America’s best-selling CUV of the past quarter century, and the CR-V e:FCEV builds on that foundation to deliver top class cabin space, cargo capacity and power.

Honda engineers optimized CR-V e:FCEV’s steering and suspension tuning to deliver the same sporty driving experience and class-leading refinement as turbo and hybrid-powered CR-V models.

Moreover, the driver can customize the driving experience of the CR-V e:FCEV with selectable drive modes, including EV modes to maximize efficiency and a Sport mode to prioritize acceleration and responsiveness.

Refueling with hydrogen takes about the same time as filling a tank with gasoline. Recharging the Honda CR-V e:FCEV takes just 1.8-hours using a level 2 charger and adds up to 29 miles of battery-powered range for short trips around town.

The Honda CR-V e:FCEV also features the Honda Power Supply Connector, turning the CUV into a clean power source capable of running small home appliances, power tools or camping equipment, as well as charging the new Honda Motocompacto e-scooter.

For additional product information, click

here

.

Honda Hydrogen Business

Honda has identified four core domains for the utilization of its fuel cell system. In addition to fuel cell electric vehicles (FCEV), the

Honda hydrogen business strategy

includes commercial vehicles, stationary power stations and construction machinery. Honda is engaged in collaboration with other companies in pursuit of these business opportunities.

Honda recently debuted a

Class 8 Hydrogen Fuel Cell Truck Concept

powered by three Honda fuel cell systems to showcase the start of a new demonstration project aimed at future production of fuel cell-powered products for the North American market.
Honda also began demonstration testing of a

stationary fuel cell power station

on its

Torrance, Calif.

campus in

March 2023

, marking the company’s first step toward future commercialization of zero-emission backup power generation.
Honda also is looking at the application of its fuel cell system to equipment such as excavators and wheel loaders, which account for a large segment of the construction machinery market.

Honda Electrification Strategy

Honda has a vision to make battery-electric and fuel cell electric vehicles represent 100% of its new vehicle sales by 2040. Toward this goal, Honda is establishing its “Honda EV Hub” in

Ohio

where the company will begin production of EVs in

North America

. Honda also recently announced plans to build a comprehensive

EV value chain in

Canada

with an approximate investment of

USD$11 billion

, to strengthen its EV supply system and capability to prepare for a future increase in EV demand in North America. It is the role of the Honda EV Hub in

Ohio

to establish the expertise and experience for EV production that will be shared across the Honda production network in

North America

, including the EV value chain initiative in

Canada

.

Moreover, each Honda auto production facility in

North America

has a critical role to play in Honda’s electrified future. Even as Honda accelerates preparation for EV production, the company plans to sustain current ICE and hybrid-electric vehicle production to meet continued strong customer demand. The sales growth of ICE and hybrid-electric vehicles also will support the required investment in the electrified future.

Importantly, Honda expects to maintain employment stability across all locations during these key next steps in the transition to the electrified future.

1. Using domestic and globally sourced parts

2. EPA-estimated 29-mile all-electric driving range when fully charged. Use for comparison purposes only. Actual range will vary based on several factors, including temperature, terrain, battery age & condition, loading, use and maintenance.

Honda Manufacturing in America

Honda has been producing automobiles in America for over 40 years, beginning in

November 1982

with the start of automobile production at the Marysville Auto Plant.

In 2022, more than two-thirds of all Honda and Acura automobiles sold in the U.S. were made in America, using domestic and globally sourced parts. Honda’s cumulative auto production in America now exceeds 30 million vehicles.

Honda established manufacturing operations in America in 1979 with the start of motorcycle production in

Marysville, Ohio

, and today has one of the largest and most diverse U.S. manufacturing footprints of any international company. More than 23,000 U.S. associates support the company’s 12 manufacturing plants in America, supporting operations that have an annual capacity of more than 1.27 million automobiles, 1.52 million engines, 500,000 power equipment products and 300,000 powersports products, as well as the HondaJet advanced light jet and GE Honda HF120 turbofan engines.

Cumulatively, Honda has invested

$19 billion

in its U.S. manufacturing operations, including more than

$3.6 billion

over the past five years alone. The company also works with 600 U.S. original equipment suppliers, with U.S.-sourced parts purchases of approximately

$492 billion

since 1979.

Learn more at